B-LOGIC Uninterruptible Power Supply
-
The B-LOGIC UPS series of products serve as intelligent battery backup power supplies for single board computers (SBC) and Xilinx gate arrays.
-
The B-LOGIC UPS maintains reliable power to your electronics, charges the on-board battery and communicates to your system the state of charge of the batteries.
-
The on-board microprocessor can indicate a power fail condition to allow your logic to initiate an orderly shutdown.
-
The outputs can be enabled and disabled through the RS232 interface or jumpers.
-
The on-board 1500 MaH battery provides over 2.5 hours of backup at maximum load, and over 5 hours for a 1 Watt device.
Technical Specifications:
-
Input Range: 9-15VDC (automotive)
-
Output 1: 3.3 Volts DC at 350 ma max - 1.1 Watts max
-
Output 2: 5.0 volts DC at 250 ma max - 1.2 Watts - User adjustable to 12 Volts
-
Output 3: 1.2 Volts at 100 ma max - other voltages available - LDO Regulator from 3.3 Volt supply
-
Output 4: 2.5 Volts at 150 ma max - other voltages available - LDO Regulator from 3.3 Volt supply
Note: Other configurations are available - Send your request to
sales@EPDElectronics.com